Product model
Thickened MiG ANK2
Introducing the pressure-bearing, wear-resistant and training venue applicable scenarios of thickened MiG suspended flooring.
View the corresponding graphic descriptionANK2ANK seriesPressure-bearing and wear-resistant type
PRODUCT DETAIL
Kart / Tennis / Pickleball training main model
AnchorCare thickened MiG (ANK2) is the pressure-bearing and wear-resistant type/main model for outdoor training in the AnchorCare ANK series. It is suitable for: children's go-kart courts, tennis courts, pickleball training, outdoor roller skating, and balance car venues.
Specifications25×25×1.2 cm
Single piece weight175 g
Column structureThickened column to bear pressure
Warranty8 years
PRODUCT MANUAL DETAIL
Product Manual Detailed Introduction: Bold MiG
REINFORCED TILE · ANK Series · AnchorCare
175gSingle chip block weightIt is 43g heavier than ANK1F and has a stronger pressure bearing capacity.
Thickened columnThickened pressure-bearing structureFor high-frequency crushing of karts and roller skating
≥95BPNFrictionMaintain anti-slip safety in dry conditions
8 yearsLimited WarrantyNo protection against damage due to non-human factors
Product positioning
YesFrequent use of go-karts, roller skating or pickleballANK2 is more resistant to pressure than standard MiG:175g block weight, thickened columns and extra-thick triangular ribs, more stable in the face of repeated rolling.
Complete parameter list
| Dimensions | 25×25×1.2 cm |
|---|---|
| Block weight | 175 gPer Tile (+33% vs ANK1F) |
| Column | ≈600 piecesReinforced Thick Pillars |
| Friction | ≥95 BPNDry Condition |
| Ball rebound | ≥92%Ball Bounce |
| Lock | Square buckle ≥2.5mmOpen-Release Snap |
| Raw materials | PP + POE+ BASF Pigment |
| Quality Certification | ISO 9001 |
| Environmental protection | GB 36246Chemical Test |
| Warranty | 8 yearsLimited Warranty |
Applicable scenarios
- Children's go-kart
- Roller skating
- Tennis
- Pickleball
Core Selling Points
- Thickened column ×600, which increases the pressure margin based on the standard MiG and is suitable for wheeled equipment scenarios.
- Extra thick triangular ribs, the cylinder is thickened and rounded, making it less likely to deform after long-term rolling.
- 175g single block weight, 43g more than ANK1F, you can feel the structural difference by holding it in your hand
- Lock gap ≥2.5mm, adapt to outdoor thermal expansion and contraction, reducing the risk of arching in large venues
Selection tips
Priority is given to ANK2 when there are wheeled equipment, go-karts or high-frequency roller skating in the venue; ANK1F is optional for general ball venues to control the budget.
Key points for selection
It is about 33% heavier than ANK1F, and the column and bottom support are more solid.
Suitable for karting, roller skating, tennis, pickleball and other venues with more lateral friction.
When the budget cannot afford flagship soft rubber, it is the main choice for outdoor training grounds.
Applicable scenarios
Children's go-kart park, tennis court, pickleball training, outdoor roller skating, balance car venue
SHORT VIDEO LIBRARY
Thickened MiG ANK2 related short video
Used in high-friction scenarios such as go-karts, roller skating, tennis, and pickleball training. Watch the short video first and then look at the detailed parameters.
REAL PRODUCT PHOTOS
Actual product photos
Supplement photos of the actual product, texture and structure to help confirm the surface texture, support structure and color perception before purchasing; the final batch color is subject to the sample and contract.
The photos are supplementary to actual shots of the corresponding model and do not replace the official parameter list, test report and stamped product booklet.
MATCHED ACCESSORY
Matching edge strips/edge closing accessories
Thickened MiG matching edge strips are used for boundary transitions in high-friction venues such as go-karts, roller skating, and tennis. The edge strips are used to transition the edges of the field, reduce the edge height difference, protect the locks and improve the overall finish; the final color, quantity and edge closing method are subject to the quotation, contract and on-site dimensions.
Matching floorANK2 thickened MiG
Applicable locationKarting, roller skating, tennis, pickleball training
Delivery ConfirmationStraight edges, corners, doorways and special-shaped areas must be calculated according to the on-site drawings
Installation tipsReserve space for expansion and contraction at the border. If necessary, use expansion screws or edge clamps to fix it.
Recommended verification before purchasing
Verify the cover page of the test report corresponding to the model and avoid substituting it with another model report.
Confirm the color, quantity, proportion of spare parts, construction expansion joints and acceptance criteria.
For large-area or bidding projects, it is recommended to obtain samples, parameter sheets and stamped information at the same time.